Control board, Mr-g50j-nz 6-5 flowchart of trouble criterion – MITSUBISHI ELECTRIC Mitsubishi Home Refrigerator MR-G50J-SS-NZ User Manual
Page 19
19
MR-G50J-NZ
6-5 FLOWCHART OF TROUBLE CRITERION
Excessive cooling
Refrigerator compartment/ Slide chilled compartment
[1]
No cooling, poor cooling
Set the temperatures
to “Low”.
No
Keep the food away
from the blowing part
Yes
Yes
Set the temperatures
to “High”.
No
Proceed to [5] at page
23.
No
No
Normal
No
Yes
Yes
The baffle does not operate
Yes
Repair the frosted part.
Refrigerator compartment
thermistor abnormal
Replace the refrigerator
compartment thermistor
Weak
Low
High
Chilled
Chilled
Middle
Refrigerator
Refrigerator
compartment
Slide chilled
compartment
Cooling
Strong
Control board
CN2A
CN4D
CN7S
4-pin
connector
6-pin
connector
Refrigerator compartment room light
Refrigerator compartment
thermistor
Slide chilled compartment
thermistor
Motor damper
(for refrigerator compartment/
slide compartment)
9
0
1
2
9
0
1
2
6
5
4
3
2
1
6
5
4
3
2
1
1
2
3
4
1
2
3
4
4
5 5
8
1
4
1
1
8
1
L
M
Are the temperatures of
refrigerator compart-
ment/ set to “Low”?
Only food around the
air blowing part get
frozen
Open the refrigerator
compartment door with
a magnet on the door
switch to check that
cold air blows from the
outlet.
Are the temperature of
refrigerator compart-
ment/ set to “High”?
Check the refrigerator compartment thermistor
Replace the motor damper (for refrig-
erator compartment/ slide chilled
compartment)
❈
Motor damper is combined with
control panel assembly.
Is the motor damper (for refrigerator compartment/ slide
compartment) covered with frost?
Chilled compartment
thermistor abnormal
Check the chilled compartment thermistor
Jumper to be cut
JP1
1
;
lowers 1
;
lowers 1
;
highers
1
;
lowers
2
;
lowers
JP2
JP3
JP6
JP4
Temperature change
Freezer
compartment
Refrigerator
compartment
Slide chilled
compartment
1
;
lowers
JP5
Versa
compartment
Ice making
compartment
Slide chilled
compartment
Refrigerator
compartment
Versa
compart-
ment
Ice
making
compart-
ment
Attach a
magnet bar
here.
Jumper
Operation P.C. board
w
1
Cutting jumper wires on operation P.C. board can
change the set temperature of each compartment.
Unscrew the back of operation p.c. board and remove
decoration panel to cut the jumper wires.
Replace the slide chilled
compartment thermistor
Expose the damper (for refrigerator compartment/ slide com-
partment) so that its operation can be visibly checked and
conduct an ice-making test. Does the baffle open/close ?
(Wait 1 minute for self-check).
(See “Self check method and its operation,
1
Ice making
test operation” at page 14.)
Put refrigerator compartment thermistor into ice water (0
:
), dis-
connect the 4-pin connector, and measure resistance between
3
(white) and
4
(white).
•
Resistance at 0
:
:approx. 6-7k
"
.
Put chilled compartment thermistor into ice water (0
:
), dis-
connect the 6-pin connector, and measure resistance between
3
(white) and
6
(white).
•
Resistance at 0
:
:approx. 6-7k
"
.
OA090-1.qxp 06.7.20 9:55 AM Page 19