Multi-Tech Systems MT128ISA-UV - Manual (Page 6)

6
Chapter 1 - Introduction
MT128ISA/PCI
Features
Your internal ISDN PC card features include:
• D Channel protocols including AT&T 5ESS, Nortel DMS-100, US NI-1 & NI2, ETSI and
Japan INS-64.
• Full B Channel protocol set including V.110, V.120, HDLC, X.75 (Transparent T.70NL,
EuroFT), MLP, async to sync PPP conversion and MLP+BOD and voice (V models).
• Bandwidth on demand (BOD) plus MLP Internet connection, RAS and related data
communications capabilities.
• ISDN BRI (2B+D) and analog ports.
• Modem applications support with ISDN throughput and digital transmission quality, e.g.,
PC Anywhere.
• Video conferencing support without extra video CODEC hardware, e.g. Vdonet’s
Vdophone.
• Software implementation of G3 fax and modem capability with no extra hardware re-
quired.
• Supports Application Interfaces including WinISDN, CAPI 2.0, Windows Comm (AT
command/S-Register/Result Codes) and NDISWAN Miniport.
• Automatic detection of incoming calls as voice or data (V models).
• Supports Windows 98, Windows NT and Windows 2000 Multilink PPP connection.
• Supports Microsoft ISDN Accelerator Pack or Microsoft Dial-up Networking.
• PnP compatibility.
• Ability to use the same communications software as analog modems.
• AT command ATS30=n, which automatically disconnects the active connection if there is
no data traffic for n x 10 seconds.
• Provides On-line test and Diagnostics tools.
What Is in Your MultiModemISDN Package?
Before installing your terminal adapter, check the package contents to ensure it includes:
• One internal ISDN PC adapter
• MT128-series System CD containing modem driver and User guide
• RJ-45 cable (6 ft.) for ISDN connection
• RJ-11 cable for POTS connection (V models only)
• Quick Start Guide
• RJ11-BTS adapter (UK only)
Note: If any of these items are missing, please contact Multi-Tech Systems or your dealer/distributor.