Multi-Tech Systems MT128ISA-UV - Manual (Page 13)

13
Chapter 2 - Installation
MT128ISA/PCI
3. If you are using a voice model adapter (models MT128ISA-UV or MT128PCI-SV only) you
may connect your current analog device to the RJ-11 Phone port. You can connect
analog telephones, G3 fax, modem, or an answering machine with the RJ-11 connector
cable.
RJ11 Analog Connection
(Telephone, G3 Fax, Answering Machine,
Modem or PBS Trunk)
RJ45 BRI Connection
Figure2-4. Modular Analog and BRI Connections
4a. Make the ISDN connection by connecting the MT128PCI-SD/SV adapter and the NT1
with the RJ-45 cable connector, and insert the ISDN BRI line into the correct NT1 socket.
OR
4b. Insert the ISDN BRI line with the RJ-45 connector cable directly into the RJ-45 jack (Line
port) on the MT128ISA-UV adapter.
Your ISDN PC environment is ready for software installation. The MT128PCI-SD/SV and adapters attach to
the ISDN T interface from the NT1. The MT128ISA-UV adapter attaches to the ISDN U interface directly with
ISDN switch.