Multi-Tech Systems MT128ISA-UV - Manual (Page 11)

11
Chapter 2 - Installation
MT128ISA/PCI
Internet Access
If you want to use an ISDN adapter to connect to the Internet, you must get an Internet access account from
an ISP (Internet Service Provider) in your country. You must also confirm with your ISP that they support either
single channel ISDN (64K) or multilinked channel (128K) access.
Safety Warnings
1. Never install telephone wiring during a lighting storm.
2. Never install telephone jacks in wet locations unless the jack is specifically designed for
wet locations.
3. This product is to be used with UL and cUL listed computers.
4. Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
5. Use caution when installing or modifying telephone lines.
6. Avoid using a telephone (other than a cordless type) during an electrical storm. There
may be a remote risk of electrical shock from lightning.
7. Do not use the telephone to report a gas leak in the vicinity of the leak.
8. To reduce the risk of fire, use only No. 26 AWG or larger Telecommunication line cord.
9. Ports that connect to other apparatus are defined as SELV. To ensure conformity wtih EN
41003, ensure that these ports connect only to the same type of port on the other appara-
tus.
Environment Setup
All ISDN adapter models are Plug and Play (PnP) compatible. Even if the BIOS or computer main board does
not provide PnP feature support, the device driver still can automatically configure the ISDN card with the
proper I/O addresses and IRQ number.