MITSUBISHI ELECTRIC TG-2000A - Manual (Page 26)

23
* Even if the G-50A is not actually connected, it is possible to set it in advance as long as
information such as system configuration, etc. is available.
When System Settings exist
Make any changes to the settings.
8.3 User Set-up
Use these settings to allow or disallow TG-2000A general
operations, printer, charge (billing), and external I/O functions.
Activating TG-2000A Functions
[Procedure]
1) Click the User set -up button
From the Initial window, click the User set-up button in the
User set -up group. The User set -up window appears.
8.3.1 General Operation
Set the schedule and summer time and turn on and off the
filter sign automatic display function.
Setting general operation options
[Procedure]
1) Click the option button.
Set the Schedule Set -up, Summer Time Set -up and Filter
sign automatic display setting. To do this, click the option
button of the setting.
Schedule Set-up
Off (Deactivate) : Turns the scheduling function off.
On (Activate)
: Turns the scheduling function on.
(Default)
Summer Time S e t-up
Off (Deactivate) : Do not automatically adjust the
G-50A for summer time.
On (Activate) : Automatically adjust the G-50A for
summer time. (Automatic updates
take place at 04: 15 A M ) (Default)
Filter sign
Off (Deactivate) : Do not automaticaly display .
On (Activate)
: Automaticaly display . (Default)
Note:
• If the settings are done out of order, some items will not be available and others will have to be
set again.
• Time set-up and Site name set-up are only performed when necessary. Check the time for each
G-50A with “Time set -up”, and set the time when necessary.
Note:
• Changing certain settings affects the status of other settings.
• User set -up in particular affect other settings and functions.
• Changing the settings on the left affects the settings on the right.
System configuration set -up > Monitoring screen set -up, Energy monitoring set-up
Monitoring screen set -up > Energy monitoring set -up
Watt hour meter set -up > Energy monitoring set-up
Note:
• When filter sign automatic display is deactivated, the filter status is not reflected automatically even
when the filter sign window is selected. When the View filter button is clicked, the filter status is
reflected.
• To use the Schedule S et -up, it is necessary to register the license number of the annual/weekly
schedule separately with the G-50A. When the license is not registered with the G-50A, it only possible
to use the weekly schedule function of the G-50A. In this case, the schedule setting made from the
integrated centralized control software TG-2000A is invalidated, resulting in operation failure.
User set-up window
General operation set-up