MITSUBISHI ELECTRIC TG-2000A - Manual (Page 12)

9
5.1 Pre-installation Steps
Preparing for installation
Before installing the TG -2000A application, do the following checks and preparatory steps.
Steps Action Details How to
1 Check the OS Check the OS Service Pack version.
• Windows XP Professional
• Windows 2000 Professional: SP2
and above
* If not the correct version,
refer to the attached
documentation, “Installing
• Windows 2000/XP” and
upgrade the OS.
2 Check the memory Check that there is at least 128 MB of
RAM (256MB or more is
recommended.)
* If necessary, add more
RAM.
3 Check the HDD free
s p a c e Check that there is at least 2GB of free
space on the C drive. (OS already set
up) * Refer to the Windows
instruction manual for
more details.
4 Printer settings Install the printer driver and check that
printing is possible. * For details, refer to the
attached instruction
manual.
5 Set the date and time In the Windows Control Panel, select
“Date and Time” and set the date, time
and region
* For details, refer to the
Windows users manual.
6 Screen size and color
settings At the “display” in the Windows Control
Panel, set the screen size to 1024 × 768
or larger and the color to 65536 colors
(High Color (16-bit)) or more. * For details, refer to the
Windows users manual.
7 Automatic login
settings Check that the Auto log-in is set. *2 * For the setting check pro-
cedure, see Appendix 2
Auto Log-in Check Proce-
dure.
8 Network settings Check that the network settings have
been performed (even if the adapter is
not connected).
* For details, refer to the
Windows users manual.
*1 Check when using the printer.
*2 Auto log-in sets the automatic start-up without entering the log-in name or password at the OS
start -up.
5.2 T G-2000A Setup
5.2.1 Setup
The following shows the TG-2000A setup disk (CD-ROM) folder configuration and files. However, it
only describes the files to be run.
CD-ROM drive\Setup\ Step1\ MSDEInst.bat
\ Step2\ DbSetup.bat
\ S t ep3\ SetupTG.exe
[Reference] CD-ROM directory structure
readme.txt : Directory structure and setup precautions of this CD-ROM
\ Setup : Set -up folder
\Tool : Air-conditioning charge calculation support tool (chargecalc.xls)
\ Manual : Operation Manual
5. Installation
Note:
• The TG -2000A will not be started automatically after starting (rebooting) the personal computer
when the TG-2000A is set to Auto reboot, unless the Auto log-in is set. When the TG -2000A is set
to Auto re-boot, be sure to set the Auto log-in.