S-registers – Multi-Tech Systems MT3334ZDX User Manual
Page 37
3 - AT Commands, S-Registers and Result Codes
37
Register:
S5
Unit:
decimal
Range:
0-32, 33-127
Default:
8(^H)
Description:
Sets ASCII code for the backspacecharacter.
Values greater than 32 disable the backspace
character.
Register:
S6
Unit:
seconds
Range:
2-65
Default:
2
Description:
Sets the time the modem waits after it goes off-
hook before it begins to dial the telephone number.
Register:
S7
Unit:
seconds
Range:
1-255
Default:
50
Description:
Sets the time the modem waits for a carrier signal
before aborting a call. Also sets the wait for silence
time for the @ dial modifier.
Register:
S8
Unit:
seconds
Range:
0-65
Default:
2
Description:
Sets the length of a pause caused by a comma
character in a dialing command.
Register:
S9
Unit:
ASCII
Range:
0-127
Default:
0
Description:
Defines Remote Configuration Escape Character.
Register:
S10
Unit:
100ms
Range:
1-254
Default:
20
Description:
Sets how long a carrier signal must be lost before
the modem disconnects.