Multi-Tech Systems MT3334ZDX User Manual
Page 30
MT3334ZDX/V Owner's Manual
30
Command:
N
n
Modulation Handshake
Values:
n = 0 or 1
Default:
1
Description: N0
Modem performs handshake only at
communication standard specified by S37 and the
B command.
N1
Modem begins handshake at communication
standard specified by S37 and the
B command.
During handshake, fallback to a lower speed can
occur.
Command:
O
n
Return Online to Data Mode
Values:
0 or 1
Default:
None
Description: O0
Exit online command mode and return to data
mode (see +++AT
command).
O1
Issue a retrain and return to online data mode.
Command:
Q
n
Enable/Disable Result Codes
Values:
n = 0 or 1
Default:
0
Description: Q0
Enable Result Codes.
Q1
Disable Result Codes.
Command:
S
r=n
Set Register Value
Values:
r = S-register number; n varies
Default:
None
Description:
Set value of register S
r to value of n, where n is
entered in decimal format.
Command:
S
r?
Read Register Value
Values:
r = S-register number
Default:
None
Description:
Read value of register
Sr and display value in 3-
digit decimal form.
Command:
V
n
Terse/Verbose Result Code Format
Values:
n = 0 or 1
Default:
1
Description: V0
Displays Result Codes as digits (terse response).
V1
Displays Result Codes as words (verbose
response).