Motorola 6840420Z01-AD User Manual

Page 9

Installing the Handsfree

Kit

• Locate the microphone no more than 16 inches

(40 cm) from the driver's mouth and out of direct air
flow from vent or defrost.

• Aim the microphone directly toward the driver. The

front of the mic should point toward the driver. The
wire comes out the back of the mic.

• Do not allow anything (such as a rear-view mirror or

sun visor) to block the path between the microphone
and the driver.

• Mount the microphone firmly so that vibrations do not

affect audio quality.

Caution: The location of the microphone MUST NOT
interfere with the vehicle’s air bag deployment.

Connect the microphone to the interface cable.

Installing the External Speaker

Note: Always use the supplied
mounting hardware.

Securely mount the speaker in
the passenger footwell, either
to the transmission hump
(center console) or beneath
the dash. Position the speaker so that it does not
directly face the microphone and does not interfere
with either the passenger or automobile seat.

Caution: The location of the external speaker MUST NOT
interfere with the vehicle’s air bag deployment.

Connect the speaker to the electronic module.

Installing the Handsfree

Kit

Installing the User Interface Module

Remove the backing of the
tape on the bottom of the
User Interface Module (UIM).

Select a suitable location on
the vehicle dash, within easy
reach of the driver, and mount the UIM. The UIM can
be mounted anywhere on the dash.

Caution: The location of the UIM MUST NOT interfere
with the vehicle’s air bag deployment.

Caution: The mounted UIM MUST NOT create a visual
distraction.

Caution: DO NOT mount the UIM on the steering wheel.

Connect the UIM to the interface cable.