Motorola i365IS Phone - Manual (Page 68)

62 calls
make and receive code calls in
LINCaround
To make a code call in LINCaround:
1 Push and hold the PTT button. Transmit
appears on the first line of display. Begin
speaking after your phone emits the
LINCaround tone.
2 Release the PTT button to listen.
Note: The tone emitted from your phone
when using LINCaround is 4 beeps and
sounds different from the standard tone
heard with on-network InstantLINC
Mobile to Mobile and Talkgroup calls.
You could receive an error message if
there are no parties on your channel or
code, or if you are out of range.
When you receive a code call using
LINCaround, Receive appears on the first line of
the display.
Note: An incoming LINCaround call can be
terminated at any time by pressing o.
make a private LINCaround call
1 Enter the 10-digit PTN of the person you
want to call on your channel, or press
-
under Contacts and select a contact, or scroll
to a number in the recent calls list.
2 Push and hold the PTT button. Begin
speaking after your phone emits the
LINCaround tone.
3 Release the PTT button to listen.
The number or name of the person you are
calling will appear in the first line of the
display.