Motorola i365IS Phone - Manual (Page 65)

59 calls
• Musical ring tones
• Call forwarding
• Messages
• Call Timers
• Call alerts
• Voice records
set your phone to LINCaround
Find it: M > LINCaround > Go To LINCaround.
After a few seconds, the LINCaround idle screen
appears. The channel you are set to appears
on the first line of the display, the code you
are set to appears on the second line of the
display and LA Ready appears just above the
softkeys.
Note: When switching from the network to
LINCaround, the last channel and code that were
set appear on the LINCaround idle screen.
While in LINCaround, this icon m appears on the
display, indicating that there is no network
signal and LINCaround is active.
Phones used in LINCaround mode should be
a minimum of 6 feet apart to maximize
performance and improve transmission range.
exit LINCaround
Find it: M > LA Options > Exit LINCaround.
The following message displays: Switching to
Network Please Wait. After a few seconds, the
network idle screen appears.
channels and codes
Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies
that allow you to make and receive
LINCaround calls. Other parties may also be
talking on the same channel.