Multi-Tech Systems ISIHP-2U - Manual (Page 20)

Software/Driver Installation (Windows NT)
20 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Installing the ISIHP in Windows NT 3.51/4.0
The following procedure describes how to install the ISIHP card in a
system operating Microsoft Windows NT 3.51 or 4.0 for use with
Remote Access Service (RAS) server and other communications/fax
server type applications. These procedures refer to both 3.51 and 4.0.
1. Install the ISIHP in an available PCI slot as described in the
installation section of this manual.
2. Turn on the computer.
3. Click Start, Settings, Control Panel, and then double-click
Network. In the Network dialog box, click the Adapters tab. Then
click Add.
4. The Select Network Adapter dialog box appears. Click Have
Disk.