Mazda 2010 CX-7 - Manual (Page 328)

Black plate (328,1)
Hands-Free Setting
qDevice
Device registration
For the registration of a Bluetooth
equipped device to Bluetooth Hands-Free,
refer to
“Bluetooth Hands-Free
Preparation
” (page 6-76).
Registered device read-out
Bluetooth Hands-Free can read-out the
devices registered to its system.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button (with/without
7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).
NOTE
For vehicles with the 7-inch navigation system,
you can also press the voice recognition/
hands-free switch with a short press and say:
[Beep]
“Telephone” or “Phone”.
2. Say: [Beep]
“Setup”
3. Prompt:
“Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
”
4. Say: [Beep]
“Pairing options”
5. Prompt:
“Select one of the following:
Pair, edit, delete, or list.
”
6. Say: [Beep]
“List”
7. Prompt:
“XXXXX..., XXXXX...,
XXXXX... (Ex. Device A, device B,
device C)
” (The voice guidance reads
out the device tags registered to the
hands-free system.)
Press the talk button with a short press
during the read-out at the desired device,
and then say one of the following voice
commands to execute it.
l
“Select phone”: Selects device (Mobile
phone) when the talk button is short-
pressed.
l
“Select music player”: Selects device
(Music player) when the talk button is
short-pressed.
l
“Edit”: Edits device when the talk
button is short-pressed.
l
“Continue”: Continues the list read-
out.
l
“Delete”: Deletes the registered device
when the talk button is short-pressed.
l
“Previous”: Returns to the previous
device in read-out when the talk button
is short-pressed.
8. Prompt:
“End of list, would you like
to start from the beginning?
”
9. Say: [Beep]
“No”
10. Prompt:
“Returning to main menu.”
Device selection
If several devices have been programmed,
the Bluetooth unit links the device last
programmed. If you would like to link a
different programmed device, it is
necessary to change the link. The order of
device priority after the link has been
changed is maintained even when the
ignition switch is turned off.
6-88
Interior Comfort
Bluetooth Hands-Free
CX-7_8AS7-EA-09E_Edition2 Page328
Friday, June 5 2009 2:26 PM
Form No.8AS7-EA-09E