Form no.8as7-ea-09e, Bluetooth hands-free – Mazda 2010 CX-7 User Manual
Page 319
Black plate (319,1)
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth Hands-Free again, or
by activating Bluetooth Hands-Free first
after turning the ignition switch from the
LOCK to the ACC position, the system
reads out a voice guidance,
“XXXXXX -
- - (Ex.
“Stan's device”) (Device tag) is
connected
”.
NOTE
l
Device registration can also be done by
operating the audio unit or panel buttons
on the navigation unit. Refer to
“Bluetooth
Audio Preparation
” (page 6-64)(For audio
unit) or the separate manual
“NAVIGATION SYSTEM Owner's Manual”
(For navigation unit).
l
Depending on the device, the registration
status may be lost after a certain period of
time. If this occurs, repeat the entire
process from Step 1.
qMaking a Call Using a Telephone
Number
NOTE
Practice this while parked until you are
confident you can do it while driving in a non-
taxing road situation. If you are not completely
comfortable, make all calls from a safe
parking position, and move out only when fully
under control and you can devote your eyes
and mind to driving.
1. Press the pick-up button (with/without
7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).
NOTE
For vehicles with the 7-inch navigation system,
you can also press the voice recognition/
hands-free switch with a short press and say:
[Beep]
“Telephone” or “Phone”.
2. Say: [Beep]
“Dial”
3. Prompt:
“Number, please”
4. Say: [Beep]
“XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
5. Prompt:
“Dialing XXXXXXXXXXX
(Ex.
“555-1234”) (Telephone number)
is this correct?
”
6. Say: [Beep]
“Yes” or “No”.
7. When
“Yes” is spoken, the procedure
proceeds to Step 8.
When
“No” is spoken, the procedure
returns to Step 3.
8. Prompt:
“Dialing”
NOTE
The
“Dial” command and a telephone number
can be combined.
Ex. In Step 2, say,
“Dial 123-4567”, then,
Steps 3 and 4 can be skipped.
qReceiving an Incoming Call
1. Prompt:
“Incoming call, press the
pickup button to answer
”.
2. To accept the call, press the pick-up
button.
To reject the call, press the hang-up
button.
Interior Comfort
Bluetooth Hands-Free
6-79
CX-7_8AS7-EA-09E_Edition2 Page319
Friday, June 5 2009 2:26 PM
Form No.8AS7-EA-09E