beautypg.com

Form no.8as7-ea-09e, Climate control system – Mazda 2010 CX-7 User Manual

Page 247

background image

Black plate (247,1)

Mode selector dial

Turn the mode selector dial to select
airflow mode (page 6-4).

NOTE

l

The mode selector dial can be set at the
intermediate positions (

) between each

mode. Set the dial to an intermediate
position if you want to slightly adjust the
airflow amount.

l

For example, when the mode selector dial is
at the

position between the

and

positions, airflow from the floor vent is less
than that of the

position.

A/C switch

Press the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.

Press the switch once again to turn the air
conditioner off.

NOTE

l

The air conditioner may not function when
the outside temperature approaches 0 °C
(32 °F).

l

When the mode is set to

or

with the

fan control dial in a position other than 0
and the temperature control dial in the
maximum cold position, the air intake
selector switches to the recirculated air
mode and the A/C turns on automatically.
If A/C is not desired, press the A/C switch
to turn it off.

Air intake selector

This switch controls the source of air
entering the vehicle.

Press the

switch to alternate

between the outside air and recirculated
air modes.

It is recommended that under normal
conditions the switch be kept in the
outside air mode.

Outside air mode (indicator light
turned off)

Outside air is taken into the vehicle. Use
this mode for normal ventilation and
heating.

Recirculated air mode (indicator light
illuminated)

Outside air is shut off. Air within the
vehicle is recirculated.

Interior Comfort

Climate Control System

6-7

CX-7_8AS7-EA-09E_Edition2 Page247
Friday, June 5 2009 2:25 PM

Form No.8AS7-EA-09E