Appendix a - technical specs – M-AUDIO 1010LT User Manual
Page 56
Appendix A - Technical Specs
Analog Audio
Peak Analog Input Signal:
+14.2 dBu (+4dBu setting
+2.1dBV (-10dBV setting)
Peak Analog Output Signal:
+14.0dBu (+4dBu setting),
+2.0dBV (-10dBV setting)
Dynamic Range:
Outputs:
101.5 dB (a-weighted),
Inputs:
99.6 dB (a-weighted)
THD (at 0dBFS):
Outputs:
less than 0.002%,
Inputs:
less than 0.002%
Frequency Response:
22Hz - 22kHz, -0.2, -0.4dB @ 48kHz;
22Hz - 40kHz, -0.2, -0.7dB @ 96kHz
Input Impedance:
9.5k ohms minimum
Input Connectors:
RCA, gold plated
Output Connectors:
RCA, gold plated
Digital Audio
Digital Input Format:
S/PDIF coaxial
Digital Input Sample Rate:
32kHz to 100kHz.
Digital Output Format:
S/PDIF coaxial, or AES/EBU data stream
over S/PDIF coaxial.
Digital Output Sample Rate:
8kHz to 100kHz.
Adapter Resource Requirements
IRQ:
One required
I/O Addresses:
Four blocks: 32, 16, 16, and 64 bytes
DMA Channels:
None required
56