Metra Electronics 99-7343 - Manual (Page 7)

1. Locate the factory wiring harness in
the dash. Metra recommends using the
proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Attach the DDIN brackets to the
aftermarket radio using the screws
supplied with the radio, then secure
the assembly to the pocket using the
(4) supplied #8 Truss head screws.
(Figure A)
3. Mount the assembly into the sub dash.
4. Reassemble dash in reverse order
of disassembly.
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Attach the Double DIN brackets to the
aftermarket radio using the screws
supplied with the radio, then mount the
unit in the sub dash. (Figure B)
3. Reassemble dash in reverse order
of disassembly.
ISO DIN head unit provisions
Double DIN head unit provisions
99-7343
(Figure A)
(Figure B)
7