Metra Electronics 99-7343 - Manual (Page 5)

5
Kit Assembly
99-7343
(Figure B)
(Figure A) (Figure C)
1. Snap the a/c vents into the a/c vent
trim panels. (Figure A)
2. Attach the left and right a/c vent trim
panels and the climate controls to
the main radio housing panel using the
provided (10) #8X1/2” Phillips screws
and (2) #8X1/4” Pan head screws.
(Figure B)
NOTE: #8X1/4” Pan head screws
must be installed in the
indicated locations.
3. Snap the hazard switch into the main
radio housing. (Figure C)
Continued on next page