Metra Electronics 99-7343 - Manual (Page 3)

1. Unclip and remove the 2 trim panels
surrounding the shifter and pocket.
(Figure A)
2. Remove (2) Phillips screws at the
bottom left and right side of the radio
trim panel. (Figure B)
3. Unclip and remove the radio trim panel
including climate control and vents.
(Figure C)
4. Remove (4) Phillips screws securing
the radio. (Figure D)
5. Remove (4) Phillips screws securing
the display then remove the factory
brackets from the display. (Figure D)
Continued on next page
3
Dash Disassembly
99-7343
(Figure B)
(Figure C)
(Figure D) (Figure A)