Basic operation (tuner) – Marantz SR5400U User Manual
Page 29
26
ENGLISH
BASIC OPERATION
(TUNER)
LISTENING TO THE TUNER
Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country’s
standard is 9 kHz step, Press
TUNER
button on
the remote more than 6 seconds. Scan step will
change.
Note:
• Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
(Using the SR5400)
1.
To select tuner and desired band (FM or AM),
press the
TUNER
button on the front panel.
2.
F/P
button on the front panel to display the
frequency.
3.
Press the
TUNING
or
button on the front
panel for more than 1 second to start the Auto
tuning function.
4.
Automatic searching begins then stops when
a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the
TUNER
button twice within in two
seconds on the remote.
2.
Press the
5
5
5
5
5
or
6
6
6
6
6
for more than 1 second on
the remote.
3.
Automatic searching begins then stops when
a station is tuned in.
If tuning does not stop at the desired station, use
to the “Manual tuning” operation.
MANUAL TUNING
(Using the SR5400)
1.
To select tuner and desired band (FM or AM),
press the
TUNER
button on the front panel
2.
Press the
F/P (Frequency/Preset)
button on
front panel, to have the frequency appear on
the display.
3.
Press the
TUNING
or
buttons.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the
TUNER
button twice within in two
seconds on the remote.
2.
Press the
5
5
5
5
5
or
6
6
6
6
6
on the remote
to tune in the
desired station.
DIRECT FREQUENCY CALL
1.
To select tuner and desired band (FM or AM),
press the
TUNER
button twice within two
seconds on the remote.
2.
Press the
F.DIR
on the remote, display will
show “
FREQ - - - -
”.
3.
Input your desired station’s frequency with the
ten numbered keypad on the remote.
4.
The desired station will automatically be tuned.
DOWN
MEMORY
TUNING
MODE
R
MUTE
S-VID
DSS/VCR2
AUX
VCR1
DVD
CD
CD-R
TAPE
TUNER
S-DIRECT
DISPLAY
A/D
6.1CH INPUT
FF
F/P
3.
2. 1.
DOWN
MEMORY
TUNING
MODE
R
MUTE
S-VI
DSS/VCR2
AUX
VCR1
DVD
CD
CD-R
TAPE
TUNER
S-DIRECT
DISPLAY
A/D
6.1CH INPUT
FF
F/P
3.
2. 1.
(FM) TUNING MODE (AUTO STEREO OR MONO)
When in the auto stereo mode,
AUTO
indicator will
be illuminated on the display.
The “
ST
” indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
“
TUNED
” and “
ST
” indicators are not illuminated.
If the signal is weak, it may be difficult to tune into
the station in stereo. In such a case, press the
MODE
button on the front panel or press the
MODE
button on the remote.
“
AUTO
” indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the “
ST
”
indicator is not illuminated.
To return to auto stereo mode, press the
MODE
button or press
MODE
button on the remote again.
AUTO
indicator is illuminated on the display.
PRESET MEMORY
With this unit you can preset up to 50 FM/AM
stations in any order.
For each station, you can memorize the frequency
and reception mode if desired.
AUTO PRESET MEMORY
This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.
UP
VOLUME
DOWN
G
MODE
MUTE
AUX INPUT
S-VIDEO
VIDEO
L
AUDIO
R
ATT
CD
CD-R
TAPE
TUNER
S-DIRECT
DISPLAY
F/P
AV SURROUND RECEIVER SR5400
UP
SELECTOR
VOLUME
DOWN
MEMORY
TUNING
MODE
CLEAR
MUTE
POWER ON/STANDBY
PHONES
ENTER
STANDBY
AUX INPUT
S-VIDEO
VIDEO
L
AUDIO
R
ATT
SELECT
DSS/VCR2
AUX
VCR1
DVD
TV
CD
CD-R
TAPE
TUNER
S-DIRECT
DISPLAY
A/D
6.1CH INPUT
VIDEO OFF
F/P
2.4.
2.
5.
1. 3.
1.
To select FM , press the
TUNER
button on the
front panel.
2.
While pressing the
MEMORY
button, press
the
TUNING
button up.
“
AUTO PRESET
” will appear on the display,
and scanning starts from the lowest frequency.
3.
Each time the tuner finds a station, scanning
will pause and the station will be played for
five seconds.
During this time, the following operations are
possible.
The band can be changed by the
TUNER
button.
4.
If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press the
TUNING
button during this period, this station
is skipped and auto presetting continues.
5.
Operation stops automatically when all 50
preset memory positions are filled or when
auto scanning attains the highest end of all
bands. If you desire to stop the auto preset
memory at anytime, press the
CLEAR
button.
MANUAL PRESET MEMORY
(Using the SR5400)
1.
Tune into the radio station you desire (Refer to
the
“MANUAL TUNING
” or
“AUTO TUNING”
section).
2.
Press the
MEMORY
button on the front panel.
“
– –
“ (preset number) starts blinking on the
display.
3.
Select the preset number by pressing the
TUNING
or
button, while this is still
blinking (approx. 5 seconds)
4.
Press the
MEMORY
button again to enter.
The display stops blinking.
The station is now stored in the specified
preset memory location.
RECEIVER SR5400
MEMORY
TUNING
M
CLEAR
S
DSS/VCR2
AUX
VCR1
DVD
TV
CD
CD-R
TAPE
S-DIRECT
D
A/D
6.1CH INPUT
VIDEO OFF
F/P
2.
4.
3.
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
MEMO
CLEAR
0
+/A
/VCR
/ANT
–/B
2.
SLEEP
MUTE
AMP
AUX
TUNER
CD
TAPE
CDR/MD
DVD
VCR1
DSS/VCR2
TV
VOL.
VOL.
TV
MAIN
1.
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
MEMO
CLEAR
0
+/A
/VCR
/ANT
–/B
2.
SLEEP
MUTE
AMP
AUX
TUNER
CD
TAPE
CDR/MD
DVD
VCR1
DSS/VCR2
TV
VOL.
VOL.
TV
MAIN
1.
MENU
OSD
SLEEP
MUTE
AMP
AUX
TUNER
CD
TAPE
CDR/MD
DVD
POWER
VCR1
DSS/VCR2
TV
VOL.
VOL.
TV
1.
DISC/DECK
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII
EX/ES
DSP
DTS
S-DIRECT
AUTO
3
2
1
6
5
4
9
8
0
7
SYSTEM REMOTE CONTROLLER
+/A
/VCR
/ANT
–/B
3.
2.
DISC/DECK
PTY
ATT.
F.DIRECT
DISP./RDS
MODE
SYSTEM REMOTE CONTROLLER
RC5400SR
+/A
/VCR
/ANT
–/B
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII
EX/ES
DSP
DTS
S-DIRECT
AUTO
3
2
1
6
5
4
9
8
0
7
T.TONE
MENU OFF
SETUP/
OK
3.
2.