Travel alar m phone dir ector y alar ms, Alar ms, Alarms – Motorola Jazz User Manual
Page 5
15
Note: You can temporarily disable a daily alert (for example, on a weekend).
To disable the alert, follow these steps.
1. From the Standby screen, press and release
*
until
ALARMS?
displays.
Press
+
to enter the ALARMS menu. Press
*+
to enter GENERAL
alarms mode.
2. Press
+
+
to move to the alert enable/disable field.
3. Press
*
until
I
I
I
I
(the disable alert icon) displays.
4. Press
)
to set and exit. The
alarm remains set and enabled, but the
alert won’t occur until it is re-enabled.
To re-enable the alert, follow these steps.
1. From the Standby screen, press and release
*
until
ALARMS?
displays.
➏
• When a GENERAL alarm expires, this screen
displays and the pager alerts.
• Press any button once to stop the alarm, and
again to clear the message.
➐
• If the GENERAL alarm is not stopped during
activation, the ALARM icon flashes.
• Press any button once to read the message,
and press again to clear.
H
H
H
H J
J
J
J
GENERAL
t 1
H
H
H
H J
J
J
J
10:00 A
9/30
TRAVEL ALAR
M
PHONE DIR
ECTOR
Y
ALAR
MS
16
Press
+
to enter the ALARMS menu. Press
*+
to enter GENERAL
alarms mode.
2. Press
+
+
to move to the alert enable/disable field. Press
*
until
J
J
J
J
(the enable alert icon) displays.
3. Press
)
to set and exit.
To disable (erase) the alarm settings, follow these steps.
1. From the Standby screen, press and release
*
until
ALARMS?
displays.
Press
+
to enter the ALARMS menu. Press
*+
to enter GENERAL
alarms mode.
2. Press
+
,
then press
*
until -- (the disable alarm icon) displays. Press
)
to set and exit.
EVENT Alarms
You can set up to three EVENT alarms. Each EVENT alarm allows you to keep
a special reminder message that displays when the alarm is activated and the
pager alerts. These can be set to alert either on a daily basis or one-time only.
➊
• From the Standby screen, press and release
*
until
ALARMS?
displays.
Press
+
to enter the ALARMS menu. Press
**+
to enter EVENT
alarm mode.
ALAR
MS
17
➋
• Press
*
to choose EVENT alarm 01, 02 or
03.
• Press
+
,
then press
*
until
.
,
(the enable
alarm icon) displays. Press
+
to move to
the next field.
➌
• Press
*
until
J
(the enable alert icon)
displays and press
+
to move to the
Message field.
➍
• Press
*
to scroll through the characters
available, then press
+
to move to the next.
Note: You can enter up to 14 characters
(letters, numbers or spaces). If the
message is less than 14 characters long,
advance to the rubout character (
®
) and
press
+
to fill the remaining character
fields with blanks.
➎
• At the last character field, press
+
to move
to the alarm Time-Date screen.
00001111////////
H
H
H
H I
I
I
I
AAAAAAAAAAAAAA
00003333 .... ,,,,
H
H
H
H I
I
I
I
AAAAAAAAAAAAAA
00003333 .... ,,,,
H
H
H
H J
J
J
J
AAAAAAAAAAAAAA
00003333 .... ,,,,
H
H
H
H J
J
J
J
P I C K U P W E N D Y £
ALAR
MS
18
➏
• Press
*
to set the hour to the desired value.
• Move to the Minute, AM/PM, Day and Month
fields by pressing
+
, then press
*
to set
the value for each field.
• Press
)
in any field to set and exit.
Note: You may only set one EVENT alarm
at a time. You must press
)
to save
each event alarm prior to setting the next
alarm.
Note: To alert on a daily basis set the Day
and Month to --/--.
➐
• The Standby screen displays with
J
(the
enable alert icon).
➑
• When an EVENT alarm expires, the message
displays and the pager alerts. Press any
button once to stop the alarm, and again to
clear the message.
00003333 .... ,,,,
H
H
H
H J
J
J
J
9:00
A
9/29
H
H
H
H J
J
J
J
9:05
P
9/28
H
H
H
H J
J
J
J
P I C K U P W E N D Y
ALARMS