Motorola Jazz - Manual (Page 11)

39
Cleaning Your Pager
To clean the pager housing, use a soft, non-abrasive cloth moistened in a mild
soap and water solution. Rinse the surface using a second cloth moistened in
clean water. Do not immerse the pager in water. Do not use alcohol or any
other cleaning solutions.
Functionality and Use of Your Pager
For questions pertaining to the functions and use of your Motorola pager
please visit our web site at www.motorola.com/pagers or in the U.S.
call 1-800-548-9954 or 1-800-793-7834 (TDD). For questions pertaining to
your paging service, contact your paging service provider.
Care and Maintenance
Jazz™ pagers are durable, reliable, and can provide years of dependable
service; however, they are precision electronic products. Water and moisture,
excessive heat, and extreme shock may damage the pager. Do not expose
your pager to these conditions. If repair is required, the Motorola Service
Organization, staffed with specially trained technicians, offers repair and
maintenance facilities throughout the world.
USE AND CARE
40
You can protect your pager purchase with an optional extended warranty
covering parts and labor. For more information about warranties, please
contact either your paging service provider, retailer, or Motorola, Inc. at 1-800-
548-9954. For repairs, call Motorola, Inc. at 1-800-548-9954 in the U.S. or
1-800-323-9685 in Canada. In the U.S., to contact Motorola, Inc. on your TDD,
call 1-800-793-7834.
Battery Information
Your Jazz™ pager operates with one AAA-size alkaline battery (carbon zinc
batteries are not recommended).
BA
TTER
Y
41
Replacing the Battery
Note: Turn the pager off before changing the battery to save messages.
❶ Turn the pager off.
❷ To remove the old battery, slide the Lock/Unlock tab away from the battery
door to unlock the door. Hold the pager in both hands and slide the door until
the locking tabs release and the Battery Door Alignment Dots align. Lift the
door until it is free of the housing.
❸ Remove the battery.
❹ Align the new battery matching the illustration on the inside of the battery
chamber. Insert the battery.
➎ Replace the battery door by aligning the grooves on the door with the grooves
on the housing. Slide the battery door until it is fully closed. Lock the battery
door by sliding the Lock/Unlock Tab on the housing toward the battery door.
BA
TTER
Y
Patent Information
This Motorola product is manufactured under one or more Motorola U.S.
patents. A partial listing of these patents is provided on the inside surface of the
battery door. Other U.S. patents covering this product are pending.
t , Motorola, FLEX, f , Jazz and QuickNotes
are trademarks or registered trademarks of Motorola, Inc.
© 1997 by Motorola, Inc. All Rights Reserved.
Paging Products Group 1500 Gateway Boulevard Boynton Beach, Florida 38426
Printed in U.S.A. 8/97
@6881029B95@
6881029B95-O
LISTED 830H
I,ABCD:DIV2:II,FG
1.5 AAA ALK T3C
RAD DEV FOR HAZ LOC INT SAFE:
R