Motorola MD670 Series - Manual (Page 38)

36
Us
in
g t
h
e
Ba
si
c
Fu
nc
tio
n
s
Erasing Numbers in Redial Memory
Using Caller ID
If you subscribe to caller ID service from your
telephone company, the phone can display the
caller’s name and/or number when you receive an
incoming call. If the phone company does not send
caller ID information or you do not subscribe to caller
ID service, the display shows
Incoming Call .
Reviewing the List of Caller ID Calls
The base station can hold up to 99 caller ID records.
The handset can hold up to 50 caller ID records. The
number of new calls is displayed on the handset and
the base station. After you review the calls, the
standby screen displays.
Note: The number of new calls displayed on the
handset and the base station may not be the same.
For example, if you answer a call on Handset 2, it
does not count as a new call on that handset.
Action
1 From the standby screen, press REDIAL
( a ).
2 Scroll ( a ) to highlight the number, press
SELECT ( a ), then press ERASE ( a ).
3 Press and hold CLEAR for 2 seconds on the
base station, or OFF on the handset to
return to the standby screen.
4110W42o.book Page 36 Tuesday, July 22, 2003 2:07 PM