Motorola MD670 Series - Manual (Page 34)

32
Us
in
g t
h
e
Ba
si
c
Fu
nc
tio
n
s
To save a number in either phonebook:
Inserting Pauses in a Phone Number
Action
1 From the standby screen, enter the phone
number, then press
PHNBK ( a ).
Note: Be sure to include long distance
codes and pauses if required.
2 At the ENTER NAME prompt, use the keypad
to enter the name (see page 39).
3 Press SAVE ( a ) to store the name and
number.
Note: If the phonebook is full, PHONEBOOK
IS FULL displays.
Tip: Erase numbers you no longer call to make
room for new ones.
4 Press and hold CLEAR for 2 second on the
base station or OFF for 2 seconds on the
handset to return to the standby screen.
Action
When you want to insert a pause, press PAUSE
( a ). A P displays.
When you call a number with a pause, the
phone waits a few seconds before transmitting
the next digits in the dialing sequence. This is
useful when you have to dial a number for
access to an outside line, or for going into a
voicemail system.
4110W42o.book Page 32 Tuesday, July 22, 2003 2:07 PM