Motorola DVD - Manual (Page 20)

15
S e t u p 1 : A n t e n n a o r C a b l e ( N o C a b l e B o x )
2
1. Connect the RF Coaxial cable currently coming from the wall to the connector labeled
RF In on the Pioneer DVD Recorder with TiVo.
2. Connect the Composite A/V cable from the Audio/Video Output 1 connectors on the
Recorder to the Audio/Video Input connectors on the TV.
3. Connect a phone line (see page 8 for help). After you complete Guided Setup (see step
6 below), you’ll be able to connect your Recorder to a home network and use a shared
broadband Internet connection instead of a phone line to connect to the TiVo service.
See Chapter 8, “Connecting to a Home Network,” in the User’s Guide.
4. Plug in all power cords.
5. Turn on your TV. If you do not see the Welcome screen displayed, use the Input,
Source, or TV/Video button on your TV to select the correct audio/video source. Press
the button until the Welcome screen is displayed. (For more help, see page 42.)
6. Once you see the Welcome screen, the last step is to complete Guided Setup (see the
User’s Guide for details). You must complete Guided Setup before you can play and
record DVDs.