Step 2: finding your setup example, What’s next – Motorola DVD User Manual
Page 10
5
U s i n g T h i s G u i d e
1
Step 2: Finding your setup example
This guide provides specific examples of connecting the Recorder to an existing antenna,
cable, or satellite system and other A/V equipment. Choose your setup example from the
ones below:
What’s next?
Connect a VCR or video camera, so you can turn your home videos into DVDs! See page
29 for instructions.
After connecting your Recorder, the last step is to complete Guided Setup; see Chapter 1
in the User’s Guide for details. You must complete Guided Setup before you can play and
record DVDs.
You use either antenna or cable without a
cable box. You may also have a VCR.
Setup 1: Antenna or Cable (No Cable
Box)
You have either a cable box or satellite
receiver (if you have both, see Setup 6
instead). You may also have a VCR.
Setup 2: Cable Box or Satellite
Receiver
You use either antenna or cable and want to
watch one channel while recording another.
Setup 3: Watching One Channel
While Recording Another
You have both a satellite box and antenna,
or both a satellite box and cable without a
cable box. (Upgrade to TiVo Plus service
required.)
Setup 4: Both a Satellite Box and an
RF Program Source
You have both a cable box and a satellite
receiver. (Upgrade to TiVo Plus service
required.)
Setup 5: Both a Cable Box and a
Satellite Receiver
You have an advanced home entertainment
system with several components.
Setup 6: Cable or Satellite Box, A/V
Receiver, and Game Console
The Recorder is not designed to
support a heavy load, such as a TV.
Your Recorder is only capable of
supporting the weight of one or two
common A/V components such as VCRs,
DVD players, or A/V receivers (provided
they have four good, broad, padded feet
that distribute the weight near the
corners of the Recorder).
Also, avoid stacking your Recorder on top
of other electronic components—such as
DVD players, A/V receivers—or the vents
of your TV.
®