Motorola HC12 - Manual (Page 296)

User’s Manual MCUez HC12 Assembler
296 Assembler Messages MOTOROLA
Assembler Messages
12.3.57 A12105: Immediate Address Mode not Allowed
Type: Error
Description: The immediate addressing mode is not allowed at that position.
Usually, this message is generated when the first operand
specified in a BCLR, BSET, BRCLR, or BRSET instruction is
preceded by the immediate character (#).
Example:
maskValue: EQU $40
BSCT
var: DS.B 1
CodeSec: SECTION
entry:
LDD #4567
BRCLR #var, #maskValue, endCode
…
endCode:
END
Tip: Remove the unexpected (#) character.
Example:
maskValue: EQU $40
BSCT
var: DS.B 1
CodeSec: SECTION
entry:
LDD #4567
BRCLR var, #maskValue, endCode
…
endCode:
END