Mitel 5055 - Manual (Page 63)

Appendix B — Web Configuration Tool
- 57 -
Table 12 Web Configuration Tool: Network Configuration Settings
Setting Name Values (bold = default) Notes
Basic
SIP Phone Host Name
Required for cable access. Default is sip1.
Domain Name
Optional. Limit of 128 characters. Default is
–example.com.
DHCP On | Off
If On, allows your ISP or LAN to allocate
you a dynamic IP address.
Address Type IPv4 | Fqdn
IPv4: outgoing SIP requests use dotted
format of IP address.
Fqdn: outgoing SIP requests use
“sip:host_name.domain” format for “contact”
SIP header.
SIP Phone IP Address
Required. Provided automatically by ISP or
LAN when DHCP is On
1 .
Subnet Mask
Required. Provided automatically by ISP or
LAN when DHCP is On
1 . Default is
255.255.255.0.
Default Gateway
Required. Provided automatically by ISP or
LAN when DHCP is On
1 .
Primary DNS
Required. Provided automatically by ISP or
LAN when DHCP is On
1 .
Secondary DNS
Optional. Provided automatically by ISP or
LAN when DHCP is On
1 .
Additional Servers
TFTP Server sipdnld.mitel.com
Optional. The server where updates to the
firmware and languages can be
downloaded using the TFTP protocol.
HTTP download URL
Optional. The address of the HTTP
server where updates to the firmware
and languages can be downloaded.
HTTP is an alternative protocol to TFTP.
If you leave this filed blank, the phone
will attempt to use TFTP to update
software. If HTTP update fails, then the
phone does not automatically “fall back”
to try TFTP.
SNTP Server
Optional. Server used for date/time
synchronization. Default is 192.53.103.103.
Time Zone
Optional. Difference between GMT and
local time. Default is –5 (Eastern Standard
Time)
1 If you change this value manually with DHCP On, it will be overwritten by the ISP/LAN the next
time the phone is rebooted.