Mitel 5055 - Manual (Page 23)

5055 SIP Phone Features
- 17 -
Switching Between Headset and Handsfree Modes
• To go from headset to handsfree mode:
− Press the Headset Key, followed by the Speaker key. The Headset key light turns
off.
− When you are connected, the Microphone key light turns red. You can now talk to
your party using the handsfree speaker.
• To go from handsfree to headset mode:
− Press the Headset key. The Headset key light turns red, and the Microphone key
light turns off.
− You can now talk to your party using the headset.
Using the SIP Phone Features
The features in this section can be accessed using the Web Configuration Tool and/or the
SIP Phone Menu Interface. You cannot change these settings using the SIP Phone Menu
Interface while on a call. You can change these settings using the Web Configuration Tool
while on a call, but the changes will not take effect until you’ve finished your current calls.
Note: Some Web Configuration Tool settings require you to reboot your SIP Phone. If you
click the Save and Reboot button while on a call, you will lose the connection when
your phone reboots.
Advisory Messages
Setting up an Advisory Message
You can set up an advisory message to alert callers to your current status (for example, when
you’re going on vacation). You set up advisory messages using the Web Configuration Tool.
Note: You cannot change your Advisory Message settings while on a call. Access the Web
Configuration Tool (see The Web Configuration Tool on page 7).
1. Click Feature Configuration.
2. Turn Advisory message On in the pull-down menu (you can use the Advisory message
key on the phone to toggle this on or off too).
3. Choose the message you want to display from the drop-down menu at the right of
“Advisory Message:”.
• If none of the choices suit you, select the message “Other reason”, and enter the
desired message beside “Other:” (any message longer than 20 characters will be
truncated on the SIP Phone display).
4. Click the Apply button at the bottom of the web page. A confirmation screen is displayed.
5. Click the OK button. Your SIP Phone is updated.
Enabling/Disabling your Advisory Message
When your Advisory Message is on, the Advisory Message indicator key turns red, and your
Advisory Message periodically replaces the time and date on your SIP Phone display.
Note: You cannot change your Advisory Message settings while on a call.