Multiquip Concrete Saw SP-6457 TD - Manual (Page 60)

60
Hydraulic System Maintenance
The hydraulic system consists of:
§ Blade Shaft § Hydraulic Pump
§ Transaxle § Hydraulic Manifold
§ Depth Stop Cylinder & Valve § Hydraulic Filter
§ Lift Cylinder § Oil Fill/ System Vent
Routine Maintenance
• Check oil level daily.
• Level the saw frame prior to service to get an accurate reading.
• Fill reservoir to Fill line when cold, with 5W-30 premium grade engine oil.
Fig. 43 — Oil Reservoir Fill Line
•
Change oil and filter annually.
Fig. 44 — The Hydraulic System
Blade Shaft
Lift Cylinder
Depth Stop Cylinder
Oil Cooler
Assembly
Hydraulic
Manifold
Transaxle
Hydraulic Pump
Oil Fill/System
Vent
Fuel Filter
Oil Filter