Multiquip Concrete Saw SP-6457 TD - Manual (Page 54)

54
Engine
The Model SP-6457 TD features a Turbocharged 57 HP Deutz diesel engine. See
the engine manual for service details and oil recommendations.
• Check air filters daily, replace as required. Do Not clean air filters.
• Check engine oil level daily.
• Level the frame prior to service to get an accurate reading.
• Do Not over-fill with oil.
• Change engine oil and filter every 125 hours of operation
CAUTION
Safety Air Filters are not intended to be used for primary air
filtration. When the Primary Filter gets clogged, replace it
immediately — do not run saw using just the Safety filter.
Air and Oil Filter Chart
Fig. 36 — Remote Filters
Filter Qty Part Number
Primary Air Filter 1 300004-1 (Donaldson #P827653)
Safety Air Filter 1 300004-2 (Donaldson #P829332)
Engine Oil Filter 1 306012 (Deutz # 1174416-SP)
Hydraulic System Filter 1 306002 (HydroGear # 51563)
Fuel Filter 1 304010 (Donaldson # 1174696)
Transaxle
filter
Fuel filter
Engine
Oil filter