MicroNet Technology Micronet WIreless LAN Outdoor Bridge SP915G - Manual (Page 26)

To select the connection type for WAN PORT, you can choose any of the
ask, IP
L and using PPPoE to connect to Internet, please click PPPoE
and type username and password.
For Disable WAN Port, please click Disable.
ote: If you change any item, click “submit” to store the value. Or click “clear”
restore previous value. To make settings working click Submit-> Reset->
estart.)
Æ WAN Status
following Mode:
• For static IP, please click Static IP and type IP address, IP netm
gateway.
• For dynamic IP address, please click the Dynamic IP and type Hostname
• For xDS
•
(N
to
R
WAN Status
When WAN setting is Dynamic IP or PPPoE click WAN Status will show
current IP status.You can click renew or release to renew or release IP at
Dynamic IP setting, and click disconnect or connect to disconnect or
26