MicroNet Technology Micronet WIreless LAN Outdoor Bridge SP915G - Manual (Page 15)

Mode: AP/Bridge or Disable Wireless. Select AP/Bridge if you want to set
wireless in AP mode.
Speed: The speed are Auto, 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps,11Mbps,
12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps.
Channel: You can select 1 of 3 country setting (US: Channel 1 ~ 11, ETSI:
Channel 1 ~13, Japan: Channel 1 ~ 14 )(Note: Channel 14 only 802.11b
mode). All devices on the network must share the same channel. (Note: The
wireless adapters will automatically scan and match the wireless setting.)
ESSID: Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default setting is
default. The SSID can be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Preamble: Pull down select “long” or “short”.
idden SSID: Enable or Disable SSID broadcast. Pull down select “y” Disable
SSID broadcast or “n” Enable SSID broadcast. Disable this feature broadcasts
the SSID across the network.
Client Isolation: Pull down “y” isolation or “n” none isolation
Encryption
The OUTDOOR BRIDGE has the newest, strongest and most advanced
security features available today. When used with other 802.11 WPA (Wi-Fi
Protected Access) compatible products in a network with a RADIUS server,
the security features include:
WPA & 802.1x represent the first line of defense against network intrusion. In
the authentication process the RADIUS server verifies the identity of the client
attempting to connect to the network. Unfamiliar clients will be denied access.
EAP(Extensible Authentication Protocol) is available through the Windows XP
perating System. You will need to use the same type of EAP protocol on all
h
O
15