MicroNet Technology Micronet WIreless LAN Outdoor Bridge SP915G - Manual (Page 16)

the devices in your network when using the 802.1x feature.
WPA (Wi-Fi Protected Access) authorizes and identifies users based on a
ral key every 10,000
ackets (a packet is a kind of message transmitted over a network.) This
,
PA-PSK allows home users that will not incorporate a RADIUS server in
of
nger will you have to
anually input a new WEP key frequently to ensure security. With the
utomatically receive a new key
very time you connect, vastly increasing the safety of your communication.
EP auth method: Select Open System to communicate the key across the
EP mode: Select 64, 128 bits.
ey Type: 64 bit support WEP password 10 bit HEX (Hexadecimal digits
onsist or the numbers 0-9 and the letters A-F) code. 128 bit support WEP
HEX code.( Note :Currently version does not support ASIC
d Key
secret key that changes automatically at regular intervals. WPA uses TKIP
(Temporal Key Integrity Protocol) to change the tempo
p
ensures much greater security than the standard WEP security. (By contrast
the previous WEP encryption implementations required the keys to be
changed manually.)
W
their network, access to WPA security. Utilizing the Pre-Shared Key mode
WPA, the OUTDOOR BRIDGE will obtain a new security key every time it
connects to the 802.11 network. You only need to input your encryption
information once in the configuration menu. No lo
m
OUTDOOR BRIDGE and WPA-PSK, you will a
e
Set Encryption to Open System
W
network.
W
K
c
password 26 bit
code.)
Valid Key: Select one of the keys in the Key table to be the active key.
Key Table: Enter up to four encryption keys here.
Set Encryption to Share
WEP auth method: Select Shared Key to communicate the key across the
network.
WEP mode: Select 64, 128 bits.
Key Type: 64 bit support WEP password 10 bit HEX (Hexadecimal digits
consist or the numbers 0-9 and the letters A-F) code. 128 bit support WEP
16