MicroNet Technology Micronet WIreless LAN Outdoor Bridge SP915G User Manual
Page 24
D
dy
HCP Server Control: Dynamic Host Configuration Protocol assigns
namic IP addresses to devices on the network. This protocol simplifies
eive IP
new IP
addresses.
Select Subnet on device IP(Such as 192.168.2.254) to allow the OUTDOOR
BRIDGE to function as a DHCP server.
start IP: Input the first IP address available for assignment in your network.
end IP: Input the end IP address available for assignment in your network.
router: Input device IP
dns: Input your ISP DNS.
wins: Input wins server IP
DHCP Clients show the client IP and client MAC setting.
(e.g. If your device ip is 192.168.2.254, then start ip is 10 and end ip is 100.
ystem will asign ip from 192.168.2.10 to 192.168.2.100 to client.)
(Note: If you change any item, click “submit” to store the value. Or click “clear”
to restore previous value. To make settings working click Submit-> Reset->
Restart.)
network management and allows new wireless devices to rec
addresses automatically without the need to manually assign
S
24