MicroNet Technology Micronet WIreless LAN Outdoor Bridge SP915G - Manual (Page 12)

Device IP Setting
Æ Ethernet
LAN is short for Local Area Network. This is considered your internal network.
These are the IP settings of the LAN interface for the OUTDOOR BRIDGE.
These settings may be referred to as private settings. You may change the
LAN IP address if needed.
IP address: The default IP address is 192.168.2.254. Assign a static IP
address that is within the IP address range of your network.
IP netmask: Enter the subnet mask. All devices in the network must share the
same subnet mask..
IP gateway: Enter the IP address of the gateway in your network.
(Note: If you change any item, click “submit” to store the value. Or click “clear”
to restore previous value. To make settings working click Submit-> Reset->
Restart.)
12