MicroNet Technology Micronet WIreless LAN Outdoor Bridge SP915G - Manual (Page 17)

password 26 bit HEX code.( Note :Currently version does not support ASIC
ode.)
icate
twork.
EP mode: Select 64, 128 bits.
ct dis then select WPA and check
PA-PSK
rk.
nterprise(802.1x)
to the authentication
nction of the RADIUS server.
he RADIUS server and port number
edicated to RADIUS accounting. The RADIUS server uses accounting to
ey: Enter the secret Key that is required of all devices to
rver.
c
Valid Key: Select one of the keys in the Key table to be the active key.
Key Table: Enter up to four encryption keys here.
Set Encryption to Open System/Shared Key
WEP auth method: Select Open System and Shared Key to commun
the key across the ne
W
Key Type: 64 bit support WEP password 10 bit HEX (Hexadecimal digits
consist or the numbers 0-9 and the letters A-F) code. 128 bit support WEP
password 26 bit HEX code.( Note :Currently version does not support ASIC
code.)
Valid Key: Select one of the keys in the Key table to be the active key.
Key Table: Enter up to four encryption keys here
Set Encryption to WPA-PSK
Authentication: WEP auth method sele
W
PSK: Enter a passphrase that will be shared by all devices using WPA-PSK on
the netwo
Set Encryption to WPA-Enterprise(802.1x)
Authentication: WEP auth method select dis then select WPA and
WPA-E
RADIUS Server: Enter the IP address of the RADIUS server.
Authentic Port: 1812 is the port number dedicated
fu
Accounting: Enter the IP address of t
d
keep track of user login sessions.
Radius K
communicate with the RADIUS se
(Note: If you change any item, click “submit” to store the value. Or click “clear”
17