beautypg.com

MSI AM-690E User Manual

Page 27

background image

2-9

Hardware Setup

Connector

IDE Connector: IDEB1

This connector supports IDE hard disk drives, optical disk drives and other IDE devices.

Important

If you install two IDE devices on the same cable, you must configure the drives
separately to master / slave mode by setting jumpers. Refer to IDE device

’s

documentation supplied by the vendors for jumper setting instructions.

Chassis Intrusion Connector: JCASE1

This connector connects to the chassis intrusion switch cable. If the chassis is

opened, the chassis intrusion mechanism will be activated. The system will record

this status and show a warning message on the screen. To clear the warning, you

must enter the BIOS utility and clear the record.

JCASE1

1
2

CINTRU

GND

IDEB1

PDF created with pdfFactory Pro trial version

www.pdffactory.com