Multi-Tech Systems MTCBA-G-UF1 - Manual (Page 28)

Chapter 2 – Installation
Multi-Tech Systems, Inc. MultiModem® GPRS with USB User Guide 28
Part C: Associating PC Port with USB Driver
9. Wait while Windows prepares the next phase of the installation (associating the PC port with
the USB drive). The Add New Hardware Wizard screen appears referring to MTS GSM
Serial Port. This is the second of the three New Hardward Wizards that will appear.
Click Next.
10. The Add New Hardware Wizard screen appears. Click on Search for the best driver for
your device (Recommended).
Click Next.
11. The Add New Hardware Wizard screen appears wanting you to select the search path.
Click on Specify a location and then click on the Browse button to locate the driver on the
CD: X:\Windows_Install\Windows_9X\USB Serial Driver
Click Next.
12. The Add New Hardware Wizard screen now indicates that it has found the drivers to the
MTS Serial Port device.
Click Next to install the driver.
13. Windows has finished installing the software that your new hardware device requires.
The association between the serial port and the USB driver has been made.
Click Finish.
The third Found New Hardware wizard will start automatically to install the modem inf file.
Part D: Installing the Modem INF File
14. Wait while Windows prepares the final phase of the installation. The Add New Hardware
Wizard screen appears. This wizard searches for new drivers for: MultiTech – GSM Modem
Click Next.
15. The Add New Hardware Wizard screen appears. Click on Search for the best driver for
your device (Recommended).
Click Next.
16. The next Add New Hardware Wizard screen appears wanting you to the select search path.
Click on Specify a location and then click on the Browse button to locate the driver on the
CD: X:\Windows_Install\Windows_9X\Modem Driver
Click Next.
17. The Add New Hardware Wizard screen now indicates that it has found the drivers for the
MultiTech – GSM Modem device.
Click Next to install the modem driver.
18. Windows has finished installing the software that your new hardware device requires.
Click Finish.
With the modem .inf file successfully installed, the entire sofware installation procedure for the
Wireless USB MultiModem is complete.