Multi-Tech Systems MTCBA-G-UF1 - Manual (Page 17)

Chapter 2 – Installation
Multi-Tech Systems, Inc. MultiModem® GPRS with USB User Guide 17
Installing Software
The wireless USB MultiModem drivers need to be installed in your computer’s program directory. The
procedure differs depending on the operating system. This section provides installation procedures for
Windows Operating Sytems (Win 98/ME/2000/2003/XP).
Linux Operating System drivers are also located on the CD in the Linux_Install directory.
Three install wizards guide you through the software Installation. In the following installation process,
Part A prepares you for the software installation.
Part B installs the USB Driver.
Part C associates the PC port with the USB Driver, and finally
Part D installs the modem .inf file.
Windows XP/2003
Part A: Preparing the Setup
CAUTION! DO NOT connect the MultiModem to the PC at this point. Follow the steps below in
sequence. Premature connection of the USB cable will cause the installation to fail.
If you have already plugged in the USB cable prematurely, cancel out of the installation wizard
and follow the instructions below.
1. Insert the MultiModem Product CD into your CDROM drive. Insertion of the product CD
triggers the Autorun feature.
2. After a brief delay, the “MultiModem Setup – Welcome to” screen appears. Close the
Welcome to screen.