Multi-Tech Systems 40-01459-D0-001 - Manual (Page 55)

Troubleshooting 49
ESCON Configuration
When the adapter loads the emulation it also loads the ESCON device configuration
(see Chapter 4.). This configuration must match the configuration defined on your
mainframe(s).
In Windows 2000 you may display an ESCON adapter’s device configuration using
the Device Manager in the Computer Management utility (Figure 6-1).
Figure 6-1. Displaying Adapter Properties
In Windows NT use the Network ICON on the Control Panel to display the server’s
network adapters (Figure 6-2).
Figure 6-2. Network Adapters