Motorola CLS SERIES CLS1410 - Manual (Page 37)

T
rou
bleshootin
g
35
Troubleshooting
Symptom Try This:
No Power
Recharge or replace Li Ion battery.
Reposition or replace Alkaline batteries.
Message not
transmitted
Make sure
Push to Talk
is completely pressed while
transmitting.
Recharge, replace, and/or reposition batteries.
Verify the transmit light is illuminated while speaking.
Verify Channel, Frequency, and Code settings are correct.
Hearing other
noises or
conversation on
a channel
Frequency may be in use. Change on all radios if possible (see
page 28 and 29).
Poor audio
quality
Bandwidth does not match. For optimal audio quality when
communicating with
_ Series radios, the bandwidth of other
radios should be set to 12.5 kHz, if possible.
6864110w15o.book Page 35 Wednesday, March 19, 2003 6:17 PM