Motorola CLS SERIES CLS1410 - Manual (Page 30)

Pr
ogramming Mode
28
Entering Programming Mode
Press and hold
Push to Talk and T for 3 seconds while turning the radio on. The
radio beeps and displays k , the channel number flashes, and the frequency
(indicated by l ) and code (indicated by y ) display alternately.
Note: If you press and release the
Push to Talk
button when programming
CSL1410 models, you will return to the front of the Programming Mode.
Selecting a Channel (CLS1410 Only)
1. In programming mode, press
S until the channel number flashes
and the frequency and code display alternately (this is the first
setting after you enter programming mode).
2. Press [ or ] to select the channel.
3. Press and hold
Push to Talk
to exit programming mode, or
press S to continue programming.
Programming the Frequency
1. In programming mode, press
S until l displays and the
frequency number flashes.
2. Press [ or ] to select the frequency.
3. Press and hold Push to Talk to exit programming mode, or
press S to continue programming.
Note: See page 39 for information on frequencies for communicating with other
business radios. If you are matching your
_ Series radio to an existing Spirit GT
radio, see page 45.
6864110w15o.book Page 28 Wednesday, March 19, 2003 6:17 PM