Miele cva 610 - Manual (Page 56)

,Ensure that power to the
appliance is OFF while installation or
repair work is performed.
All electrical work should be
performed by a qualified electrician
in strict accordance with national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous.
The manufacturer can not be held
responsible for unauthorized work.
Verify that the voltage, load and circuit
rating information found on the data
plate match the household electrical
supply before installing the coffee
system.
If there is any question concerning the
electrical connection of this appliance
to your power supply, please consult a
licensed electrician or call Miele’s
Technical Service Department.
USA
1-800-999-1360
CDN 1-800-565-6435
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
Important
The coffee system comes equipped
with a 6 ft (1.8 m) power cord with a
NEMA 6-15P molded plug for
connection to a 208-240 V, 15 A, 60 Hz
power supply.
Electrical connection
56