Multi-Tech Systems RAS96 - Manual (Page 59)

5 E1 Daughter Card
CommPlete Communications Server 51
A:\# e1setup 9b
Use settings from:
1. Use Active Settings (pre-configured card)
2. User System Defaults (new card)
3. User Stored Settings (swapping cards)
Enter Selection (q(uit), <1>): 3
1. Channel Polling Interval (Sec) : 20
2. Error Threshold : 10
3. Disconnect Timeout (sec) : 11
4. Framing Format: CRC4
5. Line Coding: Alternate Mark Inversion (AMI)
6. Signal Options : R2 MF
7. DNIS-digits (1-64 or 0 for auto): 0
8. Country Selection : ITU
9. Line Buildout : 120 Ohm
Enter Selection (-(previous), q(uit), d(one), <1>): 6
Signal Options
1. R2 Digital
2. R2 MF
Enter Selection (-(previous), <2>): -
1. Channel Polling Interval (Sec): 20
2. Error Threshold : 10
3. Disonnect Timeout (sec) : 11
4. Framing Format : CRC4
5. Line Coding : Alternate Mark Inversion (AMI)
6. Signal Options : R2 MF
7. DNIS - digits (1-64 or 0 for auto) : 0
8. Country Selection : ITU
9. Line Buildout : 120 Ohm
Enter Selection (-(previous), q(uit), d(one), <1>): 7
DNIS - digits (1-64 or 0 for auto) (-(previous), <0>): -
1.
Channel Polling Interval (Sec) : 20
2. Error Threshold : 10
3. Disconnect Timeout (sec) : 11
4. Framing Format : CRC4
5. Line Coding : Alternate Mark Inversion (AMI)
6. Signal Options : R2 MF
7. DNIS-digits (1-64 or 0 for auto) : 0
8. Country Selection : ITU
9. Line Buildout : 120 Ohm
Enter Selection (-(previous), q(uit), d(one), <1>: 8