Multi-Tech Systems RAS96 - Manual (Page 34)

RAS96 RASCard User Guide
28 CommPlete Communications Server
CPU Internal Cache/External Cache
These two categories speed up memory access when enabled.
Enabled Enable cache (Default).
Disabled Disable cache.
Quick Power On Self Test
This category speeds up the power-on self-test (POST) after you power up the
computer. If it is set to Enable, BIOS will shorten or skip some check items during
POST.
Enabled Enable quick POST.
Disabled Normal POST (Default).
Boot Sequence
This category determines which drive to search first for the disk operating system (i.e.,
DOS). Default value is A, C.
C, A System will first search for hard disk drive, then floppy disk drive.
A, C System will first search for floppy disk drive, then hard disk drive.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks.
360K type is 40 tracks, while 760K, 1.2M and 1.44M are all 80 tracks.
Enabled BIOS searches the floppy disk drive to determine if it is 40 or 80
tracks. Note that BIOS cannot differentiate the 720K, 1.2M and
1.44M drive types, as they are all 80 tracks (Default).
Disabled BIOS will not search for the type of floppy disk drive by track
number. Note that there will not be any warning message if the
drive installed is 360K.
Boot Up NumLock Status
This allows you to determine the default state of the numeric keypad. By default, the
system boots up with Num Lock on.
On Keypad is number keys.
Off Keypad is arrow keys.
Boot Up System Speed
Selects the default system speed—the normal operating speed at power-up. This
category no longer has a function and should be left at the default setting of High.
High Set the speed to High (Default).
Low Set the speed to Low.