Learn more, General tips – Motion Computing T008 User Manual
Page 8
8
J3500 Getting Started
Model T008
Become a fan on Facebook
http://www.facebook.com/MotionComputing
Motion Computing and Motion are registered trademarks of Motion Computing, Inc. in the United States and other countries. All other trademarks are
properties of their respective owners. Microsoft, Windows, and Windows Journal are trademarks or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
Copyright © 2011 Motion Computing, Inc. All rights reserved. PN 024-02-0150 Rev. A05
Learn more
The purpose of this Getting Started document is to introduce
you to your tablet’s features and provide you with tips for you
to become familiar with your tablet quickly:
The J3500 User’s Guide provides more information about the
features introduced here. You can view this and other J500
In addition to our manuals, you can get information from our
website:
•
t
•
•
Fr
•
•
General tips
•
Use only the J3500 pen or your finger on the display. The
tablet does not respond to any other type of pen or stylus.
•
Store the pen in the pen bay when not in use. To store the
pen in the pen bay, insert it into the bay and press it until
it clicks. To remove the pen, press it again. If you have the
pen tether attached, ensure that you have released the
pen before you pull it out using the tether.
•
When attaching the pen tether, slip one end of the tether
through the hole at the end of the pen and pull the pen
through the loop until it is tight. Then, slip the other end
of the tether through the attach point and pull the pen
through the loop until it is tight.
•
Clean fingerprints and smudges from the display surface
by wiping it with the display cloth provided. If needed,
use a cleaning solution recommended by Motion
Computing to clean the display. Spray the solution on the
cloth then wipe the display. See the
on our website.
•
You can find the serial number of the tablet PC in one of
the battery bays of the tablet PC.