Motion Computing T008 - Manual (Page 4)

4 J3500 Getting Started Model T008
Set up wireless
The J3500 comes with built-in Wi-Fi and Bluetooth. Your tab-
let may also be equipped with mobile broadband for access-
ing the Internet. To set up available wireless networks, follow
the steps on this page:
Step 1. Enable wireless from Motion Dashboard
1. From the task bar, tap the Dashboard icon .
2. Tap Wireless .
3. Tap the check boxes next to all wireless networks you intend
to use:
• Enable Bluetooth Internal Wireless
•
Enable 802.11 Internal Wireless
• Enable Mobile Broadband with GPS *
T
ip
If mobile broadband is not listed, your J3500 is
not configured with a mobile broadband module.
Step 2. Set up Wi-Fi
1. From the notification area tap the wireless network icon .
2. Select a wireless network from the list of available networks.
Step 3. Set up Mobile Broadband with GPS (optional)
If you purchased your J3500 with the optional mobile broad-
band module, you can connect to high-speed cellular net-
works worldwide. With the mobile broadband module and a
data plan from one of several cellular network providers, you
have full Internet access.
N
oTe
: Before you can connect to a mobile broadband
network, you must have an active account with a cellular
network provider. Some providers require a SIM card for
mobile broadband access. If you are not sure whether
you need one, contact your mobile broadband provider.
To set up mobile broadband
1. Start the Motion Connection Manager. From the Start menu,
select
All Programs > Motion Computing > MotionCM .
2. Tap the help icon and follow the instructions
provided in the topic Setting up mobile broadband.
If you purchased the optional mobile broadband module,
your tablet PC has GPS capabilities. You can use GPS with
your preferred mapping applications to find your current
and destination locations.
To use GPS
• From the notification area, tap the mobile broadband
icon then tap Start GPS.
Step 4. Set up Bluetooth
The J3500 has a built-in Bluetooth adapter to connect to
other Bluetooth enabled devices.
To add a Bluetooth device
1. From the notification area, tap the Bluetooth icon
and select Add a Device .
2. Make sure the Bluetooth device is discoverable according
to the device manufacturer’s instructions. When a Bluetooth
device is discoverable, it is visible to other Bluetooth devices
within range.
3. Select the desired Bluetooth device from the list of devices.
4. Follow the on-screen instructions.
T
ip
To make the J3500 visible to other devices, tap the
Bluetooth icon then select Open settings. On the
Options tab, select Allow Bluetooth devices to
connect to this computer.