Motorola CT-39A - Manual (Page 65)

63 FT-8800R Operating Manual
Menu #14 [DTMF S]
Function: Setting of the DTMF Autodialer Sending Speed.
Available Values: 50MS (high speed)/75MS (mid speed)/100MS (low speed) (ms)
Default: 50MS
Menu #15 [DTMF W]
Function: Loading of the DTMF Autodialer Memories. See page 48 for details.
Menu #16 [HYPER]
Function: Enables/disables the Automatic Writing feature for the Hyper Memory.
Available Values: MANUL/AUTO
Default: MANUAL
MANUL:Disables the Automatic Writing feature.
AUTO:
Enables the Automatic Writing feature. The Hyper memory data changes auto-
matically when the radio’s configuration is changed (such as Mode change, Band
Change, etc.).
Menu #17 [INET]
Function: Selects the Internet Connection mode.
Available Values: INT.COD/INT.MEM
Default: INT.COD
INT.COD: Sets up the Internet Connection mode for WIRES
TM access.
INT.MEM: Sets up the Internet Connection mode for other (DTMF string) Internet Link
System access.
Menu #18 [INET C]
Function: Selects the Access Number (DTMF digit) for WIRES™ operation.
Available Values:
CODE 0 ~ CODE 9, CODE A, CODE B, CODE C, CODE D, CODE E( ), CODE F(#)
Default: CODE 1
Menu #19 [INET M]
Function: Selects the Access Number (DTMF code) for non-WIRES™ Internet Link Sys-
tem access. See page 50 for more details.
Available Values: d-1 ~ d-16
Default: d-1
Menu #20 [KEY.MOD]
Function: Selects the key functions for the “right” band function switches.
Available Values: KEY1/KEY2
Default: KEY1
M
ENU
(“S
ET
”) M
ODE
Downloaded by
RadioAmateur.EU