Motorola CT-39A - Manual (Page 63)

61 FT-8800R Operating Manual
Menu #1 [APO]
Function: Selects the Automatic Power Off time (time before power goes off).
Available Values: OFF/0.5 H – 12.0 H in 0.5 hour multiples.
Default: OFF (Disables the APO feature)
Menu #2 [ARS]
Function: Activates/deactivates the Automatic Repeater Shift feature.
Available Values: ON/OFF
Default: Depends on the band of operation.
Menu #3 [ARTS]
Function: Selects the ARTS beep mode.
Available Values: IN RNG/OUTRNG
IN RNG: Activates the ARTS feature; a high tone beep will sound when the transceiver
first detects that you are within range, and a low beep will sound when the other
station goes out of range.
ALWAYS: Activates the ARTS feature; a high tone beep will sound every time a polling
transmission is received from the other station, and a low beep will sound once
when the other station goes out of range.
Menu #4 [BAND]
Function: Enables/disables the VFO Band edge for the current band.
Available Values: BND ON/BND.OFF
Default: BND ON
BND ON: When the VFO frequency reaches the high band edge of the current band, the
VFO frequency will jump to the low band edge of the current band (or vice
versa).
BND.OFF: When the VFO frequency reaches the high edge of the current band, the VFO
frequency will jump to the low band edge of the next band (or vice versa).
Menu #5 [BEEP]
Function: Enables/disables the beeper
Available Values: BEP. ON/BEP.OFF
Default: BEP. ON
Menu #6 [CLK.SFT]
Function: Shifting of CPU clock frequency.
Available Values: SFT. ON/SFT.OFF
Default: SFT.OFF
This function is only used to move a spurious response “birdie,” should it fall on a desired
frequency.
M
ENU
(“S
ET
”) M
ODE